Understanding the Different Types of Home Insulation

home insulationWhen it comes to insulating your home, there are many different types of insulation options to choose from. Each type of insulation has a specific installation method and advantage over other types of insulation. This article will discuss some of the most common types of insulation products, their advantages, installation methods and where they should be installed.

Blanket Insulation

Blanket insulation can be made of fiberglass, rock wool or plastic fibers. This type of insulation is used in floors, ceilings and between wall studs. It is relatively inexpensive and can easily be installed by a homeowner. The blanket insulation may have a paper backing that acts as a vapor barrier.

Foam Board Insulation

Foam board insulation is made of polystyrene or polyurethane. This type of insulation can be installed in foundation walls, floors, ceilings and unvented roofs. It offers high insulation value (R-value) and is thin. This type of insulation is installed continuously over the joist or frame of the home as an added layer of insulation.

Blown In Insulation

Blown in insulation is made of fiberglass, rock wool or cellulose. This type of insulation is perfect for finished areas and odd-shaped areas that need extra insulation. It can be installed in unfinished attics, wall cavities and other hard to reach areas. The insulation can be installed using specialized equipment or poured into the area. A homeowner can rent the equipment to install blown in insulation or a contractor can be hired to complete the project.

Spray Insulation

This type of insulation is contained in bottles. When the insulation is sprayed into the area, it expands to fill any openings in the home. It can be used in open wall cavities, attics and basements where traditional insulation batts will not fit. This insulation can be installed by a homeowner.

Rigid Fiber Insulation

Rigid fiber insulation is made of either rock wool or fiberglass. This type of insulation can withstand high temperatures and is used to insulate heating ducts in the home. This insulation is typically installed by HVAC contractors.

Structural Insulated Panels

Structural insulated panels are foam boards that are installed as a home is being built. These panels are used in unfinished walls, floors, ceiling and roofs and are considered superior to other types of construction methods. The panels are fit together to form the walls and roof of a new construction.

This article has explained the different types of home insulation products available to homeowners and contractors. Each of these methods has their own unique set of benefits. Some can be installed by the homeowner, others must be installed by a contractor.

Maintaining and Repairing Your Own Garage Door

overhead doorSomething that all home owners have in common is that they can agree on the fact that maintaining a house is a constant struggle. No matter how careful you are, everything on a house is subject to wear and tear due to weather, time, or even accidents.

The place where you store your vehicle is no exception to this rule and the garage door is perhaps one of the most commonly damaged parts of any given house. As such, performing a garage door repair is something that everyone should learn, at least for straightforward issues. First of all, you should start by familiarizing yourself with the type of garage door that you own. This will be exceedingly useful in the long run as there are specific issues that affect different types of garage doors.

With that said, the specific type does not always matter as all garage doors need to be maintained properly unless you are willing to risk running into problems faster than usual. Simple things like tightening the screws, cleaning or repairing a dusty and rusty track, and even replacing the rollers when they are too worn out are necessary to ensure the longevity of your garage door.

Weather is another issue which might be more important, depending on where you live. Cold and rainy weather can cause a variety of issues even in garage doors that are properly equipped to handle bad weather conditions. For instance, the weather seals can crack over time which means that they will need to be replaced by another seal of rubber or silicone. Lubricating certain parts with spray-on grease is a cheap and easy way of eliminating noise and reducing wear. In addition to that, it can help you perform repairs that require you to slide items such as the weather seals into place.

Performing garage door repairs by yourself is good for the ego but there are certain things that require special attention to avoid serious injury. The springs, for example, should be handled by professionals as they are under constant tension which can be released violently with a simple misstep. Finally, you should always ensure that the automatic opener is disabled and that the door is properly secured before you work under it. Hurting yourself is not worth the risk just to save a few bucks because, as they say, it is better to be safe than sorry.

Tips For Starting A Pool Maintenance Business

sparkling poolA lot of people mow lawns or clean pools when they are young to make extra money, but few people realize how much money can be made by starting a pool maintenance business. The beauty of this type of business is how easy it is to get started. All you really need is the materials to clean a pool, which all in all is not very extensive and is basically what you would need to clean up after your own pool if you had one. Most people that get started in this have a pool in the home that they grew up in and had to clean the pool as a chore.

Building Routes

With these simple skills, you can start getting clients, which you can charge anywhere from fifteen to about thirty bucks per week to do a basic chemical check.  Here’s a recent business in Modesto that has started offering pool cleaning services: http://www.bashorspoolservice.com  This involves adjusting the pH balance in the pool and adding additional chemicals that are necessary to maintain balance. Most people build routes that consist of going to between twenty and thirty houses per day, which can add up to a massive amount of money. If a person fills out their schedules completely, six figures is absolutely a reasonable number that can be achieved, with one person working on their own.

Outsourcing Work and Expanding

However, many people decide that they want to outsource some of the work that they are doing and end up hiring employees to do the actual pool routes and clean the pools. By doing this, they can then focus on expanding the company and moving on to other things, such as contracting people to do major work on pools that they clean when they experience damage.

The other option these companies have is to hire workers to do the major damages and repairs, but the bottom line is that this type of company is very easy to start and can expand rapidly. There are pool companies that are thriving in every single city, even in areas that are typically very cold during the winter months, so if you are looking for a profession that will allow you to be your own boss, work flexible hours and make a great deal of money, you may want to consider starting a pool maintenance company. Another thing to consider is the fact that if you build one of these routes and are unhappy, you can usually sell them for about a years worth of total billing revenue.